Yard Machine Edger My Yard Machine Snowblower Will Not Start. What Am I Doing Wrong?
My Yard Machine Snowblower will not start. What am I doing wrong? - yard machine edger
The last time I started - it worked. I have the cut - the gas at the top - and was preparing several times. What do you mean - "the flood"? If I flooded, what can I do? I am a woman - and have never faced this before. He was hit by a snow storm! HELP?
|
5 comments:
It's still a little cold, you need the choke, the throttle where you want. Allow the gas to start to try and then put it halfway between the on and off. The engines are clean, so that they are guidelines.
Make sure you are full of fuel and oil. Make sure the spark plug wire is securely in the socket. Follow the instructions to start.
Have you ever replaced the candle? You need to be changed every year. If you have a spark plug wrench, pull the plug to see if the tip is clean or dirty with burnt oil.
Make sure you are full of fuel and oil. Make sure the spark plug wire is securely in the socket. Follow the instructions to start.
Have you ever replaced the candle? You need to be changed every year. If you have a spark plug wrench, pull the plug to see if the tip is clean or dirty with burnt oil.
Two simple solutions are often the culprits. If your computer is working properly, you have the last time is used, replace the spark plugs and / or the battery. Most shops that can sell the team to test the battery for you.
Floods, which means that raw fuel into the combustion chamber. Super petrol is the spark plug wet behind the failure to jump the gap between the electrodes in the production process. when starting a cold engine would have to floor the accelerator in the vicinity (in) the accelerator at the top, try to push the first 10 times.If think could be flooded (strong smell of gas) then let it sit for 1 / 2 to 1 hour and try again.
Post a Comment